25mJ Mai Zane Laser Target
BAYANIN FASAHA
| BAYANIN AIKI | |
| Laser tsayin daka | 1.064m |
| Pulse matsakaicin makamashi | ≥25mJ |
| Canjin ƙarfin bugun jini | a cikin zagayowar, madaidaicin bugun bugun jini ≤8% (ƙididdiga bayan daƙiƙa 2 na fitowar haske) |
| Laser katako watsawa Angle | 0.5mrad |
| Laser Tantancewar axis kwanciyar hankali | ≤0.05mrad |
| Faɗin bugun bugun jini | ≤20ns |
| Lokacin shiryawa mai ƙarfi | ≤3s |
| AZZALUMAI | |
| Matsakaicin iyaka | 1 Hz, 5Hz, lokaci guda |
| Ci gaba da jerawa lokaci | 5min(1Hz), 1min(5Hz) |
| 5Hz matsakaicin lokacin aiki mai ci gaba | 2 min |
| Mafi ƙarancin kewayo | ≤100m |
| Matsakaicin ƙarfin jeri | ≥2000m |
| Daidaitaccen daidaituwa | ± 2m |
| Madaidaicin ma'auni | ≥ 98% |
| Rage hankali: manufa ta farko da ta ƙarshe | manufa ta farko da ta ƙarshe |
| AIKIN WARZO | |
| Nisan hasken iska | ≥2km |
| Mitar iska | m mita 20Hz |
| Coding | daidai da bukatun tsarin;Tare da ikon keɓance tsawo na coding |
| Yanayin ɓoye | daidai lambar mita |
| Daidaiton ɓoyewa | ≤± 2.5μs |
| Yanayin iska | lokacin hasarar iska ɗaya ≥20s, fara saka iska mai iska kuma, tazara ≤15s, ana iya ci gaba da haskakawa don zagayowar 8 |
| WTAKWAS DA GIRMA | |
| Nauyi | ≤450g |
| Girman | ≤67.4mm*51*90mm |
| POWER SUPPLY WUTA | |
| Wutar lantarki | 19.6 ~ 25.2V |
| CIN WUTA | |
| Amfanin wutar lantarki na jiran aiki | ≤4W |
| Matsakaicin amfani da wutar lantarki | ≤50W |
| Yawan amfani da wutar lantarki | ≤90W |
| MUHIMMIYA ADAPTABILITY | |
| Yanayin aiki | -40 ℃ ~ 55 ℃ |
| Yanayin ajiya | -55 ℃ ~ 70 ℃ |
AIKIN KULAWA
2.1Tare da aikin kewayon laser;
2.2Samar da hasashe Laser manufa;
2.3Samun damar sadarwa tare da kwamfutar mai masauki bisa ga buƙatun ka'idar sadarwa.
Mai hoto na Laser na iya gane ayyuka masu zuwa ta hanyar sadarwa ta serial:
2.3.1Amsa Laser jeri umarni, kuma za a iya dakatar a kowane lokaci bisa ga tasha umarnin;
2.3.2Ana fitar da bayanan nisa da bayanan jihar kowane bugun jini lokacin jeri;
2.3.3Ragewa tare da aikin gating nesa;
2.3.4Fara ci gaba da jeri bai sami umarnin tsayawa ba 5min(1Hz)/1min(5Hz) bayan tasha ta atomatik;
2.3.5Za'a iya saita yanayin hasken iska da coding;
2.3.6Dangane da umarnin hasken wutar lantarki na Laser, bisa ga yanayin, ɓoyewa, an saita iska, kuma yana iya dakatar da hasken wuta a kowane lokaci bisa ga umarnin dakatarwa;
2.3.7Idan ba a karɓi umarnin tsayawa ba bayan farawa da iska mai iska, zai tsaya ta atomatik bayan sake zagayowar iska ɗaya;
2.3.8Lokacin da hasken wutar lantarki na Laser, kowane bugun jini yana fitar da ƙimar nesa da bayanin jihar;
2.3.9Ƙarfin-kan duba kai da sake zagayowar duba kai da bayanin matsayin fitarwa;
2.3.10Amsa don fara umarnin duba kai da bayanin matsayin fitarwa;
2.3.11Mai ikon bayar da rahoton yawan adadin bugun bugun laser;
2.3.12Kai da ƙarshen aikin jeri na manufa.
MECHICAL INTERFACE
Hoto 1 Tsarin mu'amala
